Bending machine composition and use

4 meters bending machine use method:
1. First, turn on the power, open the key switch on the control panel, and then press the oil pump to start, so that you can hear the sound of the oil pump. (The machine does not operate at this time)
2, stroke adjustment, the use of bending machines must pay attention to adjust the journey, must be test before bending. When the upper die of the bending machine descends to the bottom, it must be ensured that there is a gap of plate thickness. Doing so may damage the mold and the machine. The adjustment of the stroke is also electric quick adjustment and manual stomach adjustment.
3, bending slot selection, generally choose the plate thickness of 8 times the width of the slot. If you bend 4mm sheets, you need to select about 32 slots.
4, rear block adjustments are generally electric quick adjustment and manual fine-tuning, method with the shears.
5, step on the foot switch to start bending, bending machine and shearing machine is different, you can release at any time, release the foot brake presser will stop, continue to step down in the tread.